Capita Mid Life Zero Snowboard - Mid-Wide | 2012
| SKU |
12-M-BD-CP-MIDL-MW |
| Brand |
Capita |
| Snowboard Width |
Mid-Wide |
| Camber Style |
Dead Flat |
| Riding Style |
Park Specific Freestyle |
| Snowboard Profile |
True Twin |
| Gender |
Guys |
| Year |
2012 |
| Condition |
New |
Capita’s Mid Life series offers a true twin freestyle experience with an overall wider frame, slightly deeper sidecut, more pronounced shoulders and distinctive tip and tail shapes. New for the 2011/12 season, Capita took a zero camber approach with this board. Zero camber smoothes turn initiation tempo at the contact points, yet retains the design stability by engaging the entire effective edge.
2011-2012 Capita Mid Life Zero Snowboard Key Features:
Zero Camber - Flat camber from contact point to contact point provides a slightly looser, easier to ride feel, without reducing the effective edge that typically results from full rocker shapes.
SS Select Core - Engineered for anytime, anywhere performance reliability, the SS Select Core provides a perfect balance between energy and stability. Vertically laminated poplar is lightweight and has a long grain orientation. There are no irregularities or finger joints allowing for consistent flex throughout the deck.
Form 6-K fiberglass construction - The Form 6-K glass configuration consists of 612g/m2 biaxial fiberglass placed on both the base and topside of the construction at 0 and 90 degree angles which allows for easy turn initiation and retained pop. The Form 6 glass configuration is laid up wet by hand during the lamination process.
Carbon Kevlar Beams - Two 20mm carbon kevlar beams are laid vertically on either side of the inserts, extended just short of the tip and tail. These beams increase torsional rigidity and response.
HMC Extruded Die-Cut Base - True to all extruded bases, this base is low maintenance, user friendly and performs well with or without constant waxing and attention. The HMC extruded base is a special "high molecular composition" base that is more dense, durable and abrasion resistant than standard extruded bases. The result is a hard, fast and reliable base that will get you where you want to go, and get you there fast.
PROFILE: True twin
RIDING STYLE/TERRAIN: Freestyle/Park
BASE: HMC extruded die-cut base
CORE: SS Select Core
SIDEWALL: ABS sidewalls
SIDECUT: Radial
STANCE: Centered
FLEX RATING: 6
- Zero Camber
- Form 6-K fiberglass construction
- 2 x 20mm Carbon Kevlar beams
- Layered silkscreened topsheet graphics
- Aluminum logo base inlay
- 360 Degree steel edges
- 4x2 Inserts
Available in 151, 155, 158 cm sizes
Find more from Capita here at Eternal.
