Stepchild Jib Stick Slim RETT Snowboard - Narrow

The Jib Stick comes with Trojan Rubber 2.0 impact strips embedded in the sidewall. The RETT is an edge detuning process that dulls the edge between your bindings so you don't have to. You can basically throw bindings on this and take it straight to the streets. The Twin shape and the Rocker profile combine make this one of the best jib boards on the market today. The Armadillo Plate binding reinforcement will help prevent insert blowouts. This board also comes with a Snag-Free base. If you suck at jibbing and want to get a whole lot better, the Jib Stick will improve your jibbing skills. The Jib Stick Slim has all of the same features as the Jib Stick, but has a slightly narrower shape for people with smaller feet. The Kicker I core gives the Jib Stick Slim a slightly softer flex than the Jib Stick.

The 2011-2012 Stepchild Jib Stick Slim RETT Snowboard key features:

Rocker 4mm: Reverse Camber - This board is pressed to resemble the bottom of a rocking chair. The rocker gives the board an easy riding feel as it is "pre-flexed" going into turns. It works well for parks, jibs and powder days.

Round Edge Tapered Tuning (RETT) - Straight from the factory, the boards come with pre-dulled edges between the bindings that gradually get sharper as they approach the nose and tail. No need to wear anything down, these boards are ready for double-kink rails straight off the shelf.

Kicker I Core - Tip to tail, fully computerized, milled and profiled poplar core that yields a smooth and consistent flex distribution.

Trojan 2.0 Sidewalls - Exclusive to the Jib Stick, Trojan Rubber 2.0 features two rubber strips inserted in the board's sidewall to act as a shock absorber.

Armadillo Plate - A diamond shaped extra layer of fiberglass is placed over the inserts to help prevent insert blowouts. The unique diamond shape strengthens the board around the inserts without interrupting the flex pattern.

Snag Free Base - These bases are hardened in the press by a temperature control system that cooks the base harder as it sandwiches the board. The base material comes out of the press much harder than it went in. Snag Free bases have no die cuts or joints in the base material which is usually how the board will snag.

PROFILE: Twin
RIDING STYLE/TERRAIN: Freestyle/Park
CORE: Kicker I core
BASE: Snag Free base
SIDEWALLS: Trojan 2.0
STANCE: Centered
STIFFNESS RATING: Medium/Medium-Soft

- Rocker 4mm: Reverse Camber
- Round edge tapered tuning (RETT)
- Armadillo Plate
- Quadrax fiberglass construction
- Smooth “soft belt base” finish - pre waxed
- Screened base
- Non-stick UV lacquer coating
- 24 Inserts

Sizing: 146, 149cm